Features for the
ICS 575863 - Chainsaw
695XL-14 GC Gas Saw Package with 14 inch/35 cm GC guide bar & FORCE3 chain. Compatible with all FORCE3 diamond chains. Easily convert to run the full line of FORCE4 & PowerGrid diamond chains with a quick switch of the drive sprocket and guide bar
The 695XL features an easy-to-start engine with a higher energy ignition system and durable, long-lasting components including a new muffler, carburetor, and piston and cylinder.
Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas power cutter for frequent use by general construction and concrete professionals.
Use on concrete, stone, masonry, brick, block and more.
Most versatile gas power cutter.
Piston and cylinder lower engine temperature.
Longer life muffler with reinforced internal baffle.
Easy-to-start with higher energy ignition system.
Gas Concrete Saw
Engine Type: 2-stroke, single cylinder, air cooled
Displacement: 5.7 cu in (94 cc)
Engine Speed Max: 9,300 +/- 150 rpm (max)
Engine Speed Idle: 2,700 +/- 100 rpm
Fuel Mix Ratio: 50:1 (2%) fuel-to-oil
Fuel Capacity: 0.26 gal (1 L)
Power Type: Gas
Use Application Asphalt
Weight, Saw Only: 21 lbs (9.6 kg)
Cutting Depth: up to 14 in (35 cm)
Bar Length: 14 in (35 cm)
Noise Level (Power): 115 dB(A), (Kwa = 1.0 dB(A))
Chain Length: 14 in (35 cm)
Noise Level (Pressure): 104 dB(A), (K=1.0 dB(A))
Horsepower: 6.4 hp (4.8 kW)
Front Handle Vibration, ahv eq Concrete Cutting: 3.6 m/s2 (K=0.2 m/s2)
Rear Handle Vibration, ahv eq Concrete Cutting: 3.1 m/s2 (K=0.2 m/s2)
Front Handle Vibration, ahv eq Pipe Cutting: 5.62 m/s2 (K=0.2 m/s2)
Rear Handle Vibration, ahv eq Pipe Cutting: 5.28 m/s2 (K=0.2 m/s2)
Water Supply (Min): 20 psi (1.4 bar)
Water Flow Req (Min): 2 gpm (8 lpm)
Unit of Measure: Each
This product may contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. For more information, go to www.P65Warnings.ca.gov.