Features for the
Husqvarna K 7000
Increased cutting performance giving higher productivity when paired with PP 70.
Increased comfort and safety
Comfortable stop time on the rotating blade giving increased comfort and safety when paired with PP 70.
Thanks to the peripheral drive you can cut far deeper than with a traditional power cutter. The cutting depth of 325 mm is sufficient to cut through a normal wall from one side only.
High power output which operates on both 3-phase (5.5 kW) at 180-480 V and 1-phase (1.5-3 kW) 120–240 V.
Exceptionally low vibrations
Vibrations below 2.5 m/s2 in the cutter handles for more comfort and longer operation periods.
Automatically optimized power and rpm
This machine is controlled by a power pack with built-in intelligence that communicates with the machine motor to ensure optimal power and rpm for each cutting job.
On/Off water trigger
Wet cutting is supported by easily adjustable water flow during operation. The water flow starts first when the trigger lock-out is activated.
Concrete, stone, and masonry
Cutting of concrete, stone and masonry in renovation, re-building, and new construction.
Output power: 7.4 hp
Rated input power: 4/ 7.4 hp
Voltage: 220-240 / 200-480 V
Frequency: 50/60 Hz
Cutting depth, max: 12.8 in
Blade diameter, max: 17 in
Blade thickness, max: 0.2 in
Peripheral speed, max: 10800 fpm
Product size length: 31.3 in
Product size width: 8.8 in
Product size height: 18.6 in
Weight: 27.3 lbs.
Sound and noise
Sound power level, guaranteed (LWA): 111 dB(A)
Sound pressure level at operator’s ear: 99 dB(A)
Vibrations left/front handle: 2.7 m/s²
Vibrations right/rear handle: 1.9 m/s²
This product may contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. For more information, go to www.P65Warnings.ca.gov.