Features for the
Easy-Kleen EZP3004-3-208-A Pressure Washer
Ideal for use in processing plants, mills, and factories for everyday reliable cleaning. Stationary frame options are available for facilities that require a piped in system for multiple location cleaning and/or multiple gun use.
QUICK KLEEN BURNERS
Each model in the Buffalo Series is equipped with a quick clean burner system. Your burner orifices should be cleaned every 6 months and this system makes it easy to do so. You simply disconnect the wiring harness, remove 2 bolts and your burner will slide out with ease. Once you have cleaned your burner, the apparatus will easily slide back into place with a little push. Quick and Easy Maintenance.
QUICK ADJUST AIR FLOW VENTS
The Quick-Adjust Air Flow vents allow you to adjust the amount of air that is flowing into the burner chamber. This adjustment allows you to maximize the efficiency of the burner by fine-tuning the CO levels to optimize emission levels. This allows you to adjust your air flow quickly and simply.
TIP AHEAD SHROUD WITH INTEGRATED BELT GUARD
The tip ahead shroud allows you to easily access all your motor and pump components in seconds. You simply loosen the T-Nuts on both sides of the unit and pull the shroud forward. The belt guard is integrated into the design of the shroud for maximum serviceability and safety. This ensures that your belt and pulley system will never be exposed.
NEMA 4 WATERTIGHT CONTROL PANEL
Electrical NEMA 4 watertight control panels complete with hinged covers are utilized for easy service access. No unnecessary electronics are used when designing these units, making service and diagnostics simple. Available with a standard on/off switch or optional auto start/stop timer shutdown.
ELECTRIC MOTORS
2 to 50 HP totally enclosed fan cooled full-frame 1750 RPM electric motors. Single-phase equipped with a 1.15 service factor, 3PH equipped with a 1.25 service factor, both are high efficiency.
GENERAL PUMPS
Italian-made industrial heavy-duty triplex plunger pump with oil bath crankcases, stainless steel valves, and brass manifolds. General Pumps are the most widely used pumps in the world.
BELT DRIVE
Large diameter pulleys are used to reduce belt wear.
HEATING COIL COLLAPSE
Elliptically wound cold process of stretched reduced full body normalized ASTM A53/APIPSL schedule 80 or 160 pipe. The coil is structurally braced to minimize pipe wear and vibration. It is sealed with a ceramic blanket in a stainless-steel housing.
BURNERS
Quality North American-made natural gas or propane fired burners and controls with adjustable thermostats are used for efficiency, dependability, and serviceability. Units are equipped with quick kleen burner apparatuses. Burners jets have 6 oxygen orifice inlets to ensure maximum burn and minimize CO results.
FRAME
Rugged 11 gauge and 1/4” bent one-piece plate steel frame is fully welded with a powder coat finish. Frames are equipped with 11-gauge steel shrouds with integrated belt guards for maximum serviceability.
INCLUDES
Gun and wand assembly, 50 feet of high-pressure hose, high-pressure chemical injection, 5 nozzles, and poly float tanks on 4 - 12 GPM units.
Specifications
Model: EZN3004-3-208-A
GPM: 4
PSI: 3000
Input: 390,000 BTU
Drive: Belt
HP: 7.5
Volts: 460V
WARNING:
This product may contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. For more information, go to www.P65Warnings.ca.gov.