Features for the
DR Power TT13036BMN Tiller
Manual Depth Control
A simple lever, within easy reach from your tow vehicle, allows you to adjust the tilling depth while you remain seated. Just stop the vehicle, make the adjustment, and resume tilling.
12 Bolo Tines
Forged of tough tempered steel, these tines spin at over 230 rpm to dig up to 7-1/2" deep and mix soil completely. The intricately designed sweeps and curves of each tine minimize the wrapping of vegetation.
Transfers full power from the engine to the tines. Shear pins on the tine shaft are designed to break if the tines hit an immovable object, to protect the engine and engine shaft from damage. (Four extra shear pins are included and they are simple to install. No tools required.)
Our unique hitch absorbs shocks and jolts so that minimal forward motion from the tiller is transmitted to the towing vehicle for smoother and easier operation.
Extra Heavy-Duty Steel Frame
This frame is built to last under punishing conditions. Made of 1-1/2" square tubing and 12-gauge steel. Baked on powder coat finish resists corrosion.
The tires are resin composite and 9.5" in diameter and 2" wide for easy rolling during transport.
Shipping Weight: 232 lbs.
Weight: 175 lbs.
Shipping Dimensions: 53.75"L x 43.25"W x 38"H
Fuel Capacity: 3 qtr.
Run Time: 1-2 hrs. approx.
Air Filter: Dual element
Engine Type: OHV
Ft Lbs. Torque: 9.5
Make: Briggs & Stratton
Model: 950 CR Series
Number Of Cylinders: 1
Starting Type: Manual
Dimensions: 9" diameter, 2" width
Number of Tines: 12
Tilling Width: 36"
Tine Range: 1 1/2" above ground, 7 1/2" below ground
Frame: 12 ga Steel
This product may contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. For more information, go to www.P65Warnings.ca.gov.