Features for the
DR Power ST49019DEN Stump Grinder
Simple Operation
Position the DR Stump Grinder over a stump, lock one wheel in place with the wheel brake, engage the cutting head, and pivot easily from side to side, shaving off an inch or so with each pass. Reposition the machine and repeat until the entire stump is reduced to a pile of wood chips.
Self-Propelled
Our dual shaft transmission, with built in differential, makes for smooth, easy, self-propelled transport between job sites.
Protective Shroud
While in transport mode, the shroud prevents the spinning teeth from running aground. Once you arrive at your destination and disengage the drive, it's easy to expose the teeth (no tools required).
Mining-grade teeth
The cutter head features 8 steel teeth that are tipped with mining-grade tungsten carbide a material 10 times harder than steel and which is used for drilling through bedrock. Spinning at 2800 rpm, these teeth take a remarkable 372 "bites" per second!
Engine
Our DR OHV engine (389cc) with electric-starting provides 11.7 HP (19.6 ft-lbs. gross torque*) — all the muscle you need to power through the toughest hardwood stumps of any size.
Simple hand controls
Control the wheel brakes and engine throttle right from the handlebars. Lock one wheel in place while you pivot the machine back and forth to grind away a stump. Unlock and reposition as needed, right from your working position.
Specifications
CLUTCH
Clutch: Yes
DIMENSIONS
Handlebar Height: Adjustable at 33in, 37in, 40in
Height: 39in
Length: 51in
Shipping Weight: 233 lbs.
Weight: 187 lbs.
Width: 29in
Shipping Dimensions: 54.75inL x 35.5inW x 45.25inH
CUTTING
Number of Teeth: 8
Tooth RPM: 2800
ENGINE
Air Filter: Paper
Cooling Methods: Air
Displacement: 389 cc
Engine Shaft Diameter: 1"
Engine Type: OHV
Ft Lbs. Torque: *19.6 ft.-lbs. gross torque (per SAE J1940)
Horsepower: 11.7 HP
Lubrication: Splash
Make: DR
Number Of Cylinders: 1
Oil Capacity: 37 oz.
Oil Filter: No
Oil Type: 30W HD
Pre-Cleaner: Yes
Starting Type: Electric
Choke/Primer: Choke
FUEL SYSTEM
Fuel Capacity: 3.2 Qtrs.
Fuel Shutoff Value: Yes
GENERAL
CARB Certified: Yes
Assembly: Yes
Optimized Using FEA For Strength: Yes
Type: Self-Propelled
WHEELS TIRES
Brake: Yes
Dimensions: 15 x 4.75"
Number of Tires: 2
Tire Size: 12.5 x 4 inch
Tread: Saw Tooth
Wheel Brake with Lock: Yes
MATERIAL
Cutting Blade Material: Replaceable carbide tipped teeth
Frame: 12 gauge
Grease Fittings: Yes
Handlebar Style: Height adjustable (with tools) 33", 37", 40"
WARNING:
This product may contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. For more information, go to www.P65Warnings.ca.gov.