Features for the
DR Power ST45015DEN Stump Grinder
Simple Operation
Position the DR Stump Grinder over a stump, lock one wheel in place with the wheel brake, engage the cutting head, and pivot easily from side to side, shaving off an inch or so with each pass. Reposition the machine and repeat until the entire stump is reduced to a pile of wood chips.
Oversized tires roll over rough terrain
These lugged high-flotation tires make for easy transport and give the machine full support during operation. Large size (15" x 4.75") helps to keep machine elevated over wood chips during operation.
Mining-grade teeth
The cutter head features 8 steel teeth that are tipped with mining-grade tungsten carbide a material 10 times harder than steel and which is used for drilling through bedrock. Spinning at 2800 rpm, these teeth take a remarkable 372 "bites" per second!
Engine
Our DR OHV engine with 9.2 HP (15.3 ft.-lbs. gross torque*) has the muscle to power through hardwood stumps of any size. Available with choice of manual- or electric starting.
Simple hand controls
Control the wheel brakes and engine throttle right from the handlebars. Lock one wheel in place while you pivot the machine back and forth to grind away a stump. Unlock and reposition as needed, right from your working position.
Specifications
CLUTCH
Clutch: Yes
DIMENSIONS
Handlebar Height: Adjustable at 33", 37", 40"
Height: 39"
Length: 51"
Shipping Weight: 218 lbs.
Weight: 153 lbs.
Width: 29in
Shipping Dimensions: 54.75"L x 35.5"W x 45.25"H
CUTTING
Number of Teeth: 8
Tooth RPM: 2800
ENGINE
Air Filter: Paper
Cooling Methods: Air
Displacement: 301 cc
Engine Shaft Diameter: 1"
Engine Type: OHV
Ft Lbs. Torque: *15.3 ft-lbs. gross torque (per SAE J1940)
Horsepower: 9.2 HP
Lubrication: Splash
Make: DR
Number Of Cylinders: 1
Oil Capacity: 37 oz
Oil Filter: No
Oil Type: 30W HD
Pre-Cleaner: Yes
Starting Type: Electric
Choke/Primer: Choke
FUEL SYSTEM
Fuel Capacity: 3.2 Qrts
Fuel Shutoff Value: Yes
GENERAL
CARB Certified: Yes
Assembly: Yes
Optimized Using FEA For Strength: Yes
WHEELS/TIRES
Brake: Yes
Dimensions: 15" x 4.75"
Number of Tires: 2
Tire Size: 15" x 4.75"
Tread: Saw Tooth
Wheel Brake with Lock: Yes
MATERIAL
Cutting Blade Material: Replaceable carbide tipped teeth
Frame: 12 gauge
Grease Fittings: Yes
Handlebar Style: Height adjustable (with tools) 33", 37", 40"
WARNING:
This product may contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. For more information, go to www.P65Warnings.ca.gov.